Linear quadratic regulator for laser beam shaping

The performance of an adaptive optics system depends on multiple factors, including the quality of the laser beam before being projected to the mesosphere. In general, cumbersome procedures are required to optimize the laser beam in terms of amplitude and phase. However, aberrations produced by the optics of the laser beam system are still detected during the operations due to, for example, uncertainty in the utilized models. In this paper we propose the use of feedback to overcome the presence of model uncertainty and disturbances. In particular we use a Linear Quadratic Regulator (LQR) for closed loop laser beam shaping using a setup of two deformable mirrors. The proposed method is studied and simulated to provide an automatic optimization of the Amplitude of the laser beam. The performance of the LQR control algorithm is evaluated via numerical simulations using the root mean square error (RMSE). The results show an effective amplitude correction of the laser system aberrations after 20 iterations of the algorithm, a RMSE less than 0.7 was obtained, with about 140 actuators per mirror and a separation of z=3 [m] among the mirrors.     

Employment of Carbon Nanomaterials for Welding Polyethylene Joints with a Nd:YAG Laser

Single-lap polymeric joints can be obtained using laser welding overlapping two polymeric sheets, with one laser transparent and the other laser adsorbent. In this study we employed crystalline carbon nanomaterials (in amounts of 0.2, 0.5, and 1.0 wt.%) as filler to enhance the absorption of polyethylene (UHMWPE type). A Nd:YAG laser operating at 1064 nm was used as a power source to make the welded joints. Morphological, mechanical, and calorimetrical tests were carried out to study the strength of the joints made. Serious attention was paid to find the best compromise between exposure time to laser light and filler amount. We found that in the optimal conditions (with 0.2 wt.% filler and 60 s exposure time) the joint exhibits a good shear strength with a regular welded area. In fact, the best conditions guarantee proper absorption power of the laser light and deep interpenetration of the chains between the two polymeric sheets without any damage.     

Quantitative measurement of hard X-ray spectra from laser-driven fast ignition plasma

Absolute Kα line spectroscopy is proposed for studying laser–plasma interactions taking place in the Au cone-guided fast ignition targets. X-ray spectra ranging from 20 to 100 keV were quantitatively measured with a Laue spectrometer composed of a cylindrically curved crystal and a filter-absorption method for Bremsstrahlung continuum emission. The absolute sensitivities of the Laue spectrometer systems were calibrated using pre-characterized laser-produced X-ray sources and radioisotopes. The integrated reflectivity for the crystal is in good agreement with predictions by an X-ray diffraction code. The energy transfer efficiency from incident laser beams to hot electrons, as the energy transfer mechanism, is derived from this work. The absolute yield of Au and Ta Kα lines were measured in the fast ignition experimental campaign performed at Institute of Laser Engineering, Osaka University. Applying the hot electron spectrum information from electron spectrometer and scaling laws, the energy transfer efficiency from the incident LFEX, a kJ-class PW laser, to hot electrons was derived for the first time.     

Interference of Data Transmission in Access and Backbone Networks by High-Power Sensor System

Currently, individual optical fibers are mostly used for each non-data application, which is very inefficient and uneconomical. Sharing a single fiber for multiple applications is a promising solution. However, in the case of a non-data application, the situation is much more complicated compared to data because of special application´s requirements. In laboratory setup, we performed a measurement with a standard G.652D optical fiber for analyzing possible interaction of stable frequency/accurate time transmission, 1.25/10Gbps data transmission (typical bitrates for access point-to-point networks), and high-power sensor signal for different channel spacing and different pulse duration of sensor signal.     

Site symmetry and crystal field splittings of Ce 3+ in LiLuF 4 and LiSr 0.8 Ca 0.2 AlF 6

Electron paramagnetic resonance (EPR) spectra of Ce 3+ in LiLuF 4 (LLF) and LiSr 0.8 Ca 0.2 AlF 6 (LSCAF) observed at low temperatures (<20 v K) show that the Ce 3+ centers have tetragonal and pseudo-trigonal symmetry with ( g , g )=(2.751, 1.467) and (2.14, 0.80), respectively. The EPR lines of Ce 3+ in LSCAF are inhomogeneously broadened by different Ce 3+ configurations which correspond to the random occupation of the second nearest neighbor cation sites by Ca 2+ and Sr 2+ and/or charge compensators. These EPR results indicate that the Ce 3+ centers in LLF and LSCAF are associated with substitution of Ce 3+ for Lu 3+ with eight-fold coordination and Sr 2+ /Ca 2+ with six-fold coordination, respectively. Fourier transform infrared absorption has been used to measure transitions between the 2 F 5/2 ground state and the 2 F 7/2 multiplet of Ce 3+ in LLF at 10 v K. The optical absorption and luminescence of Ce 3+ :LLF and Ce 3+ :LSCAF in the UV range are strongly polarized. The energy levels and polarization dependence of the optical transitions can be accounted for in terms of the crystal field potential experienced by the Ce 3+ ions under the action of the different point group symmetries.     

Propagation characteristics of tilted partially coherent rectangular flat-topped beam in turbulent atmosphere

In this paper, the effects of atmospheric turbulence on the intensity distribution of a tilted Rectangular Partially Coherent Flat-Topped (RPCFT) beam were studied. An analytical formula for the intensity distribution was derived. POWER In Bucket (PIB) value is calculated numerically. The effects of source parameters – such as correlation length, order of flatness and tilt coefficient – on the intensity were analyzed. Detailed analysis demonstrates that these parameters have an influence on beam propagation properties. The analyses are illustrated by numerical examples and graphs.     

A modified sequential extraction method for arsenic fractionation in sediments

A modified sequential extraction method was developed to characterize arsenic (As) associated with different solid constituents in surficial deposits (sediments), which are unconsolidated glacial deposits overlying bedrock. Current sequential extraction methods produce a significant amount of unresolved As in the residual fraction, but our proposed scheme can fractionate >90% of the As present in sediments. Sediment samples containing different As concentrations (3–35 μg g⁻¹) were used to assess the developed method. The pooled amount of As recovered from all the fractions using the developed method was similar (83–122%) to the total As extracted by acid digestion. The concentrations of As in different fractions using the developed scheme were comparable (89–106%) to the As fractions obtained by other existing methods. The developed method was also evaluated for the sequential extraction of other metals such as copper (Cu), cobalt (Co), chromium (Cr) and strontium (Sr) in the sediment samples. The pooled concentrations of these four individual metals from all the fractions were similar (96–104%) to their total concentrations extracted by acid digestion. During method development, we used extractants that did not contain chloride to eliminate formation of polyatomic ions of argon chloride (⁴⁰Ar³⁵Cl) that interfered with ⁷⁵As when analyzed using inductively coupled plasma mass spectrometer (ICP-MS). The results suggest that the developed method can reliably be employed for complete As and other metals’ fractionation in sediments using ICP-MS.     

浅谈高等教育心理学在大学物理实验教学中的应用——在牛顿环实验中的尝试

随着现代教育的发展,关注大学生的学习心理研究,提高全体学生的学习效率和效果,教育心理学逐步走入课堂,越来越被教育工作者所重视。许多教师广泛采用教育心理学的原理和理论结构来指导自己的教学实践,并且取得了令人满意的成效。本文采用理论联系实际的方法,对高等教育心理学在牛顿环实验教学中的应用进行了有益探索。     

Self-swept erbium fiber laser around 1.56 μm

Self-swept erbium fiber laser emitting around 1.56?μm is reported in detail. Both sweep directions were registered: pointing toward longer and shorter wavelengths, redshift and blueshift sweeping, respectively. We describe method of determining the direction of the wavelength drift using the monochromator based optical spectrum analyzer. Possible root for this sweeping regime, i.e., the gain modulation along active fiber, is discussed with the help of a simple model calculating the overall cavity gain that can predict the direction of the laser wavelength sweeping.